2012年12月26日星期三

3-Aminopropyltriethoxysilane (CAS NO: 919-30-2)

Product Name
3-Aminopropyltriethoxysilane
Other Names
A-1100
Z-6011
KBM-903
Dynasylan AMEO
KH-550
Properties
CAS No.
919-30-2
EINECS No.
213-048-4
Structure
3-Aminopropyltriethoxysilane Structure
Appearance:
Colorless transparent liquid
Boiling Point (°C)
217
Flash Point (°C)
96
Applications:
3-Aminopropyltriethoxysilane applied in plastic products (including cables, glassfiber-reinforcement plastics etc.), rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials (plastic magnet and rubber magnet), metallic casting resins and resins concrete, etc.
3-Aminopropyltriethoxysilane maximizes the physical and electrical properties of mineral-filled phenolics, epoxies, polyamides, polybutylene terephthalate, and a host of other thermoset and thermoplastic composites. Filler wetting and dispersibility in the polymer matrix are also improved.
It also improves adhesion between magnetic powder and organic resins and dispersion of magnetic powder inorganic resins. Also these magnetic appliances attain higher magnetic orientation and excellent magnetic properties, higher mechanical strength, good processability, excellent weathering resistance.
In glass-reinforced thermoset plastics, 3-Aminopropyltriethoxysilane enhances the flexural, compressive, and interlaminar shear strengths before and after exposure to humidity. It greatly improves wet electrical properties.
With nitrile, polysulfide, epoxy, urethane, and adhesives and sealants, it improves pigment dispersion and maximizes adhesion to glass, aluminum, and steel.
Glass-reinforced thermoplastics, polyamides, polyesters, and polycarbonates exhibit increased flexural and tensile strengths before and after wet exposure.
In glass fiber and mineral wool insulation, as a phenolics resin binder additive, It imparts moisture resistance and allows recovery after compression.
In shell molding foundry applications, 3-Aminopropyltriethoxysilane strengthens the bond between the phenolics binder and foundry sand.
In grinding wheels, 3-Aminopropyltriethoxysilane promotes an improved, water-resistant bond between the abrasive grit and phenolics resin binder.
Packing:
Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.
 http://www.profirst.biz/Enweb/Product.56.html
siinfo@profirst.biz

没有评论:

发表评论