2-(3,4-Epoxycyclohexyl)ethyl]trimethoxysilane （CAS NO: 3388-04-3）

Product Name	2-(3, 4-Epoxycyclohexyl)ethyl]trimethoxysilane
Other Names	A-186	Z-6043	KBM-303
Properties
CAS No.	3388-04-3
EINECS No.	222-217-1
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	310
Flash Point (°C)	163
Applications:	2-(3, 4-Epoxycyclohexyl)ethyl]trimethoxysilane (CAS No. 3388-04-3), silane coupling agent KH-566, is an essential ingredient in the products of many industries.
	Glass fiber/glass fabric composites: As a finish or a size ingredient Foundry resins: As an additive to polyurethane resins Sealants and adhesives: As a primer or additive Mineral filled composites: For pretreatment of fillers and pigments or as an additive to the polymer Paints and coatings: As an additive and as a primer for improving adhesion to the substrate, especially glass and metal
	Improved shelf life over aminosilanes in polyurethanes
	Important product effects that can be achieved through the use of KH-566 include: Improved mechanical properties, such as flexural strength, tensile strength, impact strength and modulus of elasticity
	Improved moisture and corrosion resistance
	Improved electrical properties, for example dielectric constant, volume resistivity.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 
http://www.profirst.biz/Enweb/Product.81.html
siinfo@profirst.biz

(3-Glycidoxypropyl)methyldiethoxysilane （CAS NO: 2897-60-1）

Product Name	3-(2,3-epoxypropoxy)propyl]diethoxymethylsilane
Other Names	Wetlink78	Z-6042	KBE-402
Properties
CAS No.	2897-60-1
EINECS No.	220-780-8
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	122
Flash Point (°C)	100
Applications:	An excellent candidate for formulations employing carboxylated latexes (acrylic, SBR polyurethane, etc. ) exhibiting a pH between 6 and 8.5.
	Can be employed as an adhesion promoter or crosslinker. It may be suitable for use as a water stable single component crosslinker in applications such as: Automotive laminate adhesives Furniture laminate adhesives Flocking adhesives
	In such applications, 3-(2, 3-Epoxypropyloxy)propyl methyldiethoxysilane should provide a means of replacing a 2 part waterborne adhesive with a single component system. The benefits of a silane crosslinked water stable single component system include reduced scrap, improved process efficiency and reduced crosslinker toxicity.
	As an adhesion promoter for waterborne systems such as the acrylic sealant, 3-(2, 3-Epoxypropyloxy)propyl methyldiethoxysilane offers consistent and dramatic improvements in water stable adhesion performance.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 
http://www.profirst.biz/Enweb/Product.97.html
siinfo@profirst.biz

(3-Glycidyloxypropyl)triethoxysilane （CAS NO: 2602-34-8）

Product Name	3-Glycidoxypropyltriethoxysilane
Other Names	KH-561	Z-6041	KBE-403	Dynasylan GLYEO
Properties
CAS No.	2602-34-8
EINECS No.	220-011-6
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	124
Flash Point (°C)	144
Applications:	3-Glycidoxypropyltriethoxysilane (CAS No. 2602-34-8), Silane coupling agent KH-561, is an essential ingredient in the products of many industries. Examples are: Glass fiber/glass fabric composites: As a finish or a size ingredient Foundry resins: As an additive to polyurethane resins Sealants and adhesives: As a primer or additive Mineral filled composites: For pretreatment of fillers and pigments or as an additive to the polymer Paints and coatings: As an additive and as a primer for improving adhesion to the substrate, especially glass and metal
	Improved shelf life over aminosilanes in polyurethanes Important product effects that can be achieved through the use of KH-561 include: Improved mechanical properties, such as flexural strength, tensile strength, impact strength and modulus of elasticity Improved moisture and corrosion resistance Improved electrical properties, for example dielectric constant, volume resistivity.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 
http://www.profirst.biz/Enweb/Product.98.html
siinfo@profirst.biz

3-Glycidoxypropyltrimethoxysilane （CAS NO: 2530-83-8）

Product Name	3-Glycidoxypropyltrimethoxysilane
Other Names	A-187	Z-6040	KBM-403	Dynasylan GLYMO	KH-560
Properties
CAS No.	2530-83-8
EINECS No.	219-784-2
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	290
Flash Point (°C)	118
Applications:	Improves dry and wet strength in cured composites reinforced with glass fiber rovings.
	Enhances wet electrical properties of epoxy-based encapsulate and packaging materials.
	Eliminates the need for a separate primer in polysulfide and urethane sealants.
	Improves adhesion in waterbome acrylic sealants and in urethane and epoxy coatings.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 
http://www.profirst.biz/Enweb/Product.55.html
siinfo@profirst.biz

Vinyltris(methylethylketoxime)silane （CAS NO: 2224-33-1）

Product Name	Vinyltris(methylethylketoxime)silane
Other Names
Properties
CAS No.	2224-33-1
EINECS No.	218-747-8
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	115
Flash Point (°C)	63
Applications:	Vinyltris(methylethylketoxime)silane is used as a neutral curing agent in silicone sealant formulations.
	In most cases Vinyltris(methylethylketoxime)silane is used in combination with methyloxime silane.
	Compared to formulations based on methyloxime silanes only, the use of combinations containing methyl- and vinyloxime silanes leads to a shorter skin formation time of the silicone sealant without a reduction of the curing time.
	The ability of the sealant to withstand stress early, required for a certain elasticity and tear resistance, is achieved.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer

http://www.profirst.biz/Enweb/Product.46.html
siinfo@profirst.biz

Vinyltriethoxysilane （CAS NO: 78-08-0）

Product Name	Vinyltriethoxysilane
Other Names	A-151	Z-6518	KBE-1003	Dynasylan  VTEO
Properties
CAS No.	78-08-0
EINECS No.	201-081-7
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	160
Flash Point (°C)	34
Applications:	Coupling agent in filled polymer systems, which cure via a free radical mechanism.
	Finish for glass or a binder additive in glass-reinforced polyester resins.
	Integral additive in mineral-filled polyester or DAP resin compounds.
	Additive to mineral-filled elastomers which are peroxide vulcanised.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 http://www.profirst.biz/Enweb/Product.60.html
siinfo@profirst.biz

Vinyltrimethoxysilane （CAS NO: 2768-02-7）

Product Name	Vinyltrimethoxysilane
Other Names	A-171	Z-6300	KBM-1003	Dynasylan VTMO
Properties
CAS No.	2768-02-7
EINECS No.	220-449-8
Structure
Appearance:	Colorless transparent liquid
Boiling Point (°C)	122
Flash Point (°C)	23
Applications:	Polymer Modification: Vinyltrimethoxysilane is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols.
	Crosslinking of Silane-Grafted Polymers: The reaction of Silane-grafted polyethylene to form a crosslinked or vulcanized polyethylene uses water to form the crosslinks. This technology is widely used around the world for commercial applications in wire and cable insulation, tubing, and other similar uses. The basic reaction sequence is as follows: polyethylene is reacted (grafted) with vinyltrimethoxysilane, using a peroxide initiator, in an extruder. The grafted polyethylene is then formed into a finished product, such as cable jacketing, wire insulation, or pipe. The forming step is usually done by a second extrusion, during which a catalyst for the moisture-cure step is added. Finally, the formed article is exposed to moisture or hot water to cause hydrolysis of the Silane and condensation to form crosslinks via Si-O-Si bond formation.
Packing:	Packed with 5L, 20L or 210L plastic/steel drum, 1000L IBC container, or according to customer’s requirement.

 
http://www.profirst.biz/Enweb/Product.59.html
siinfo@profirst.biz